Home / Auto Paint SHERWIN WILLIAMS FC720 QT Finish 1 Ultimate Overall CLEAR COAT KIT

Auto Paint SHERWIN WILLIAMS FC720 QT Finish 1 Ultimate Overall CLEAR COAT KIT

Quantity
ADD TO CART
BUY IT NOW
  • Detail
    NOT FOR SALE TO CALIFORNIA MARYLAND DELAWARE RESIDENCE
    Due to the High VOC limits for California Maryland Delaware, check your location regulations to verify it can be used in your area.

    1 QT of FC720 and 1 1/2 PT of FH612
    FC720 is a 4.29 VOC high solids, urethane clearcoat designed for overall refinishing. This clearcoat works well in air dry or force dry environments and provide excellent gloss, DOI, leveling, blending, and buffing characteristics
    • 1 QT Mix 4:1 with hardener
    • Made in the USA

    Substrates:
    FC720 can be applied over Basecoats or cured Single-Stage Enamels

    Application:
    • Apply 2 coats, allowing each coat to flash to hand-slick between coats or a wet-on-wet “limited flash” application can be used allowing a 2-5 minute flash between coats.
    • Adjust air pressure to: HVLP 8 - 10 psi, Conventional 50 – 60 psi
    ReCoat
    • Basecoat: 10-15 minutes
    • Single-Stage Enamels: 8 hours to overnight dry
    • Clearcoat: Allow FC720 clearcoat to dry overnight, then scuff with 1000 grit and reapply clearcoat
    Drying:

    Air Dry Times at 70°F
    • Dust Free: 40-45 minutes
    • To Deliver: 8 hours
    • Force Dry: 30 minutes @120°F surface temperature
    Buffing:
    If necessary, after 24 hours air dry, or cool down from force dry, sand with 1500 or finer grit paper and buff with the appropriate compound. Buffing is easiest when done within the first 48 hours following applicat

  • Customer Reviews
    No comments